Frequently Asked Questions

*Be aware that some cutout designs are delicate and may not survive removal intact. Please apply and remove with care!* 

1. Remove the adhesive back liner
2. Hold the bamboo back with two hands making sure that it is elevated from your device by half an inch and visually center it. 
3. Slowly contact the bamboo back to your device
4. Check the alignment. If placement is off, carefully remove and retry. If satisfied, gently press down while working your way outwards to ensure good adhesion.
5. You're done!

Feedback makes us better. Let us know what you think about your new bamboo back on Facebook or Twitter!